We are committed to maximizing your driving convenience, and here to hold your back. Here's what you need to know before using this function:
When you need the Force Start Function:
1) If you see the 'ERROR CODE 2' on the screen:
The screen will show 'ERROR CODE 2' if your battery voltage is between 0.7~8V.
2) If you don't see the 'READY' icon or any Error Code icon on the:
If the vehicle battery voltage is below 0.7V, jump starter can't detect it as a vehicle battery. That is why the screen won't show the 'READY' icon or any Error Code icon.
How to use the Force Start Function:
1) Before you start: check your battery level
Make sure that the jump starter battery level is at least 20%.
2) 4 Steps of the Force Start Function
Step 1: Insert the battery clamps into the booster and attach the clamps to the car battery. (The screen may display 'Error Code 2' or won't display any instructions.)
Step 2: Press the Power Button and Flashlight Button simultaneously for 2-3 seconds to start the force output.
Step 3: Start the car engine.
Step 4: Remove the clamps from the car battery.
If you still need assistance, please contact us:
The serial number of your product Where can I find the serial number?
- Your vehicle model
Any images or videos about the quality problems